By bringing insulation to the outside of external walls, this barrier EWI eliminates thermal bridges; reduces air, wind and moisture penetration through the system; stabilises the interior environment and minimises thermal shock.
Drysulation has been independently certified for use with either standard (white) or high performance low lambda grade (grey) expanded polystyrene (EPS) to meet the thermal needs of all wall and building types. It also has a wide range of finish options to suit architectural requirements.
|Insulation||Dryvit Expanded Polystyrene (White) , Dryvit LL Expanded Polystyrene (Grey)|
|Base Coat||Primus M|
|Reinforcing Mesh||Reinforcing Mesh Range|
|Primers||Color Prime , Color Prime S|
|Standard Finishes||PMR Finishes , HDP Finishes , FD PMR Finishes|
|Speciality Finishes||Ameristone , TerraNeo , Stone Mist , Stone Mist T , Custom Brick , Drytex Wood ,|
|Coating and Sealers||Silstar Pro , Demandit Smooth , Weatherlastic Smooth , HDP Water Repellent Paint|
Where the External Wall Insulation System must meet the requirements of a specific European or National approval it is important to check that the selected system and material combination is covered within the relevant approval document. For information on the scope of our approvals and certification please click on the relevant link or contact Dryvit UK Ltd for further advice on system selection.