Anti-Crack Render Systems

Dryvit ACR systems and the Cement Board MD Finish System are a range of 100% acrylic polymer based anti-crack renders designed to outperform the shrinkage and cracking characteristics of traditional renders. The range offers a variety of coloured and textured coating options providing various levels of protection when used in the different component combinations.

Dryvit ACR systems are generally installed over a Dryvit polymer modified re-profiling mortar where levelling is required, on to exterior concrete, brickwork, blockwork, plastered or painted surfaces in new build or refurbishment projects. Dryvit ACR systems often compliment our range of EWI systems where either insulation is not a requirement or where robust detailing is necessary.

The Cement Board MD Finish System incorporates an exterior grade cement board fixed to vertical batons and is ideal where a cavity system is called for without the need for exterior insulation. This system is commonly applied over timber or steel framed substrates, incorporating an approved sheathing and breather membrane on new build residential and low-rise commercial projects.

Refer to System Sheets for a guide to each system build-up see below.

 

 

Dryvit ACR 50

Dryvit ACR 50

Dryvit ACR 50 is a cost-effective system incorporating a wide choice of Dryvit Standard and Speciality finishes. Dryvit Stucco Build is used where the substrate requires levelling, offering greater flexural strength than that of a traditional sand/cement render system.

Find out more...
Dryvit ACR 150

Dryvit ACR 150

Dryvit ACR 150 is a crack resistant system with a single component pre-bagged polymer modified render Dryvit Stucco Build, incorporating an alkali resistant glass fibre reinforcement to increase the flexural strength and impact resistance. Available with a wide choice of Dryvit Standard and Speciality finishes.

Find out more...
Dryvit ACR 200

Dryvit ACR 200

Dryvit ACR 200 is a crack resistant system with a polymer modified cementitious base coat incorporating an alkali resistant glass fibre reinforcement available and with a wide range of Dryvit Standard and Speciality Finishes. Thanks to its high fire performance, ACR 200 can be used for projects without height restrictions.

Find out more...
Dryvit ACR 300

Dryvit ACR 300

Dryvit ACR 300 is a high performance crack resistant system with non-cementitious base coat incorporating an alkali resistant fibre reinforcement providing ultimate flexibility. Combined with a high performance Dryvit finish coat plus the option of a pre-bagged polymer modified levelling render.

Find out more...
Cement Board MD Finish System

Cement Board MD Finish System

Dryvit's Cement Board MD Finish System is an exterior finish system applied over exterior cement board with a secondary weather resistive barrier and moisture drainage.

Find out more...

This website uses cookies and other tracking technologies (also known as pixels or beacons) to aid your experience (such as viewing videos), as well as “performance cookies” to analyze your use of this website and to assist with marketing efforts. If you click the "Accept All Cookies" button or continue navigating the website, you agree to having those first and third-party cookies set on your device. If you do not wish to accept cookies from this website, you can choose to not allow cookies from this website by updating your browser preferences. For more information on how we use Cookies, please read our Privacy Policy.

Accept All Cookies

Stay Connected